|
|
| 09:00-10:55 |
Keynote Speakers - ROOM 1
|
| 09:00-09:25 |
Artificial Intelligence Transforms Oil Analysis: A Case Study of Predictive Analytics |
|
Sam FISHER |
|
Bureau Veritas’ Oil Condition Monitoring Group |
| 09:25-09:50 |
Future trends |
|
Christine FUCHS |
|
Fuchs Petrolub Se |
| 09:50-10:15 |
Condition monitoring, connected industry, and circular economy |
|
Winfried KEIPER |
|
Robert Bosch GmbH |
| 10:15-10:40 |
Bioinspired Mechanically Durable Superliquiphilic/phobic Surfaces |
|
Bharat BHUSHAN |
|
Winbigler/Ohio Eminent Scholar |
| 10:40-10:55 |
CDTI: Funding I+D to Market and Society” |
|
Mª Del Pilar DE MIGUEL ORTEGA |
|
Centre for the Development of Industrial Technology (CDTI) |
|
|
|
| 11:20-13:20 |
Tribology 1 - ROOM 1
|
| 11:20-11:40 |
Overview of Tribological Societies in Europe |
|
Manfred JUNGK |
|
MJ-Tribology |
| 11:40-12:00 |
Friction Energy Balance Regularities and Tribology’s Nano-Structural Standard |
|
Sergey FEDOROV VASILIY |
|
Kaliningrad State Technical University |
| 12:00-12:20 |
Effect of crystal grain size on sliding durability |
|
Mikiharu TAKAGI , Ryoichi ICHINO , Masaaki KATO , Tomomi HONDA |
|
Toyohashi Plating Co., Ltd., Nagoya University , Nagoya Municipal Industrial Research Institute, University of Hukui |
| 12:20-12:40 |
Multifunctional TiO2 coatings by Plasma Electrolytic Oxidation on TiNbZrTa alloy for dental applications |
|
Virginia SÁENZ DE VITERI GIMENO, Raquel BAYÓN , Ana VELA , Anisoara CIMPEAN , Doina STANCIU |
|
IK4-TEKNIKER, MUGAPE S.L., University of Bucharest, R&D Consulting and Services SRL |
| 12:40-13:00 |
Enhancement of the wear-corrosion behaviour of a TSA coating for offshore submerged components |
|
Ainara LÓPEZ-ORTEGA , Jose Luis ARANA , Raquel BAYÓN |
|
IK4-TEKNIKER, University of the Basque Country |
| 13:00-13:20 |
Tribobocorrosion behavior of bio-functionalized TiO2 nanotubes in artificial saliva |
|
Sofia ALVES AFONSO, André ROSSI L., Ana RIBEIRO R., Fatih TOPTAN , Ana PINTO M., Tolou SHOKUHFAR , Jean-Pierre CELIS , Luís ROCHA A. |
|
IK4-TEKNIKER, Brazilian Center for Research in Physics, University of Grande Rio, University of Minho, University of Illinois at Chicago, KU Leuven, UNESP – Universidade Estadual Paulista |
|
|
|
| 14:20-16:00 |
Tribology 2 - ROOM 1
|
| 14:20-14:40 |
Initial tests on feasibility of DLC coatings for hydrodynamic bearings |
|
Michal WASILCZUK , Michal WODTKE |
|
Gdansk University of Technology |
| 14:40-15:00 |
Limitation of application and a new approach in tribotesting of thin hard coatings on heavily loaded lubricated machine components |
|
Marian SZCZEREK , Remigiusz MICHALCZEWSKI , Witold PIEKOSZEWSKI , Waldemar TUSZYNSKI , Andrzej WIECZOREK |
|
Institute for Sustainable Technologies - National Research Institute, Silesian University of Technology |
| 15:00-15:20 |
Tribological properties of hard coatings synthesized by ion assisted depososition and ion implantation |
|
Branko SKORIC , Aleksandar MILETIC , Pal TEREK , Lazar KOVACEVIC , Dragan KUKURUZOVIC |
|
University of Novi Sad, Faculty of Technical Sciences |
| 15:20-15:40 |
The influence of roughness and coefficient of friction on the wear of sliding surfaces and the effects of the application of hard, carbon based surface coatings. |
|
Chris H WALKER |
|
Diamond Hard Surfaces Ltd |
| 15:40-16:00 |
Wear behavior of surface melted Magnesium alloy AZ31 pre-sprayed with WC-Co-Cr |
|
Mehran KARIMZADEHKHOEI , Reza SOLTANI , Mahmoud HEYDARZADEH SOHI |
|
University of Tehran |
|
|
|
| 16:25-18:25 |
Tribology 3 - ROOM 1
|
| 16:25-16:45 |
Tribochemical reaction of ionic liquids in vacuum |
|
Francesco PAGANO , Amaya IGARTUA , Raquel BAYÓN , Ichiro MINAMI , Nicole DÖRR |
|
IK4-TEKNIKER, Lulea Technical University, AC2T GmbH |
| 16:45-17:05 |
Behaviour of the Lubricating Grease Structure during a Tribologically Stress |
|
Erik KUHN , Nazli ACAR |
|
Hamburg University of Appl. Sc. |
| 17:05-17:25 |
Effects of eccentric loading on lip seal performance |
|
Wilbert SINZARA, Ian SHERRINGTON, Edward H SMITH, Hadley BROOKS, Ahmed ONSY |
|
Jost Institute for Tribotechnology, N/A |
| 17:25-17:45 |
Studying the tribological properties of modified HNBR Rubber employing Rotational Cone Tribometer |
|
Achim FRICK |
|
Institute of Polymer Science and Processing (iPSP), Aalen University |
| 17:45-18:05 |
Experimental study on plastic injection moulding moulds wear |
|
Borja ZABALA , Amaya IGARTUA , Txomin GOITIA , Javier CALVO , Ana GARCÍA , Xana FERNÁNDEZ , Ainara LÓPEZ , Juan Carlos RODRIGUEZ , Frank GIROT |
|
IK4-TEKNIKER, MAIER S. COOP, University of the Basque Country, UPV-EHU, Faculty of Engineering |
| 18:05-18:25 |
Molecular dynamics modeling of sliding performance of amorphous silica tribofilm. The impact of thermal conditions |
|
Andrey DMITRIEV , Anton NIKONOV , Werner ÖSTERLE |
|
Institute Of Strength Physics And Materials Science SB RAS, Federal Institute for Materials Research and Testing (BAM) |
|
|
|
| 11:20-13:20 |
Lubricants and lubrication 1 - ROOM 2
|
| 11:20-11:40 |
Evolution in lube management – Central-European overview |
|
Zoltan KECSKES , Dr. Mária SUTYINSZKI |
|
MOL-LUB Ltd. |
| 11:40-12:00 |
PAGs: The Power of Synthetic Base Stocks |
|
Marcel HARHAUSEN |
|
BASF SE |
| 12:00-12:20 |
Low viscosity engine oils: fuel economy and performance. What can be expected on real world? |
|
Bernardo TORMOS MARTINEZ, Vicente MACIÁN MARTINEZ, Sophia BASTIDAS MONCAYO, Tomás PÉREZ GUTIERREZ, Luis FERNÁNDEZ RUIZ-MORÓN |
|
Universitat Politècnica de València, Repsol SA |
| 12:20-12:40 |
Investigations of the Oxidation stability, solvency and low temperature properties of naphthenic/paraffinic base oil blends |
|
Thomas NORRBY , Ann-Louise JONSSON |
|
Nynas AB |
| 12:40-13:00 |
Substitution of Zinc Stearate in Cold Extrusion Processes |
|
Wigand BRAUNE , Wilhelm REHBEIN |
|
Lanxess Deutschland GmbH |
| 13:00-13:20 |
Assessment and verification of environmental acceptable hydraulic fluids according to the European Ecolabel’s revision |
|
Vincent BOUILLON |
|
BFB OIL RESEARCH S.A. |
|
|
|
| 14:20-16:00 |
Lubricants and lubrication 2 - ROOM 2
|
| 14:20-14:40 |
Graphene based dry lubrication in rolling contacts |
|
Florian PAPE , Sara KNIGGE , Birgit GLASMACHER , Garhard POLL |
|
Leibniz Universitaet Hannover |
| 14:40-15:00 |
MoS2-based hybrid nanoparticles: friction modifier nanoadditives for engine oils |
|
Ramón TENA-ZAERA , Ignacio GARCIA , Hans GRANDE |
|
CIDETEC |
| 15:00-15:20 |
Turbine Oils -Trends and Additive Solutions |
|
Thomas RUEHLE |
|
BASF SE |
| 15:20-15:40 |
Antifoam Technologies for Lubricating Oils |
|
Ernest C. GALGOCI , Justin MYKIETYN |
|
Münzing North America LP |
| 15:40-16:00 |
Waxes as Additives in Lubricants |
|
Peter PYKA |
|
Keim Additec Surface GmbH |
|
|
|
| 16:25-18:25 |
Lubricants and lubrication 3 - ROOM 2
|
| 16:25-16:45 |
Influence of the additives and their chemistry on the oil wetting behaviour on steel at room and elevated temperature |
|
Mitjan KALIN , Maja KUS |
|
University of Ljubljana |
| 16:45-17:05 |
Recent developments in the use of ionic liquids and layered nanomaterials as additives for high-end lubrication applications |
|
Thomas J. S. SCHUBERT , Sebastian PLEBST , Frank M. STIEMKE , Boyan ILIEV , Maria AHRENS |
|
IoLiTec Ionic Liquids Technologies |
| 17:05-17:25 |
Friction and thermal properties of newly synthesized ionic liquids on a DLC surface |
|
Hirofumi KONDO , Kouki HATSUDA , Nobuo TANO , Pankaj BAGHEL |
|
Dexerials Corporation |
| 17:25-17:45 |
Tribological assessment of nanoadditives for next generation of lubricants |
|
Marta HERNAIZ , Gemma MENDOZA , Vanesa ALONSO , Iker ELEXPE ITURBE, Xana FERNÁNDEZ , Leandre MUNTADA , Eva ORTEGA |
|
IK4-TEKNIKER, BRUGAROLAS |
| 17:45-18:05 |
Nanofluid for Industrial Waste Heat Recovery |
|
Marta HERNAIZ , N. URANGA , Amaya IGARTUA , C. CERRILLO |
|
IK4-TEKNIKER |
| 18:05-18:25 |
Determination of adhesive properties of lubricants on surfaces |
|
Susanne BEYER-FAISS |
|
Dr. Tillwich GmbH Werner Stehr |
|
|
|
| 11:20-13:20 |
Condition monitoring 1 - ROOM 3
|
| 11:20-11:40 |
Schaeffler 4.0 - Smart Services |
|
Tiago MONTEIRO |
|
Schaeffler Iberia, S.L.U. |
| 11:40-12:00 |
Data empiric modeling and principle component analysis in in-service lubricant monitoring for equipment proactive maintenance |
|
Paulo FERREIRA , Carlos MOTA , Emanuele ROCCO |
|
Galp |
| 12:00-12:20 |
Lubrication program betterment through use of ISO 55000 requirements |
|
Bryan JOHNSON |
|
ICML |
| 12:20-12:40 |
Management Strategy for Maximised Reliability, Availability and Predictability of Equipment |
|
Brian BYRNE |
|
QuadB Engineering |
| 12:40-13:00 |
DataConnect: Bridging the gap between Oil Analysis and The Industrial Internet of Things (IIOT) |
|
Gwyn SIMMONDS |
|
POLARIS Laboratories Europe |
| 13:00-13:20 |
A dynamic optimization methodology for maintenance and logistics |
|
Eduardo GILABERT GARCIA-PELAYO, Egoitz KONDE , Asier RABANAL , Aitor ARNAIZ |
|
IK4-TEKNIKER |
|
|
|
| 14:20-16:00 |
Condition monitoring 2 - ROOM 3
|
| 14:20-14:40 |
ARFO - Beyond Traditional Analytical Ferrography |
|
Barbara MONSE |
|
SYNLAB Analytics & Services |
| 14:40-15:00 |
Study on the condition monitoring method by using the online color sensor |
|
Tomomi HONDA , Zuliana ZAINOL , Tomohiko KON |
|
University of Fukui |
| 15:00-15:20 |
Rapid determination of key oil condition parameters in the field using portable infrared spectrometers. |
|
Stuart LUNT |
|
Parker Kittiwake |
| 15:20-15:40 |
Assessing Oxidation Condition and Lubricant Refreshment in Turbine Oils |
|
Andrés LANTOS , Dave WOOTON , Gabriel LUCCHIARI , Sebastián LAURÍA , Andrés BODNER , Esteban LANTOS |
|
Laboratorio Dr. Lantos - Wearcheck Argentina, Wooton Consulting |
| 15:40-16:00 |
Lubricant volatility analysis by Thermogravimetric Analysis (TGA) using the Noack test defined by ASTM D6375 |
|
Cory SCHOMBURG |
|
PerkinElmer, Inc. |
|
|
|
| 16:25-18:25 |
Condition monitoring 3 - ROOM 3
|
| 16:25-16:45 |
Infrared Spectral Microscopy – A Tool for Understanding Varnish Formation |
|
Dave WOOTON , Cory SCHOMBURG |
|
Wooton-Consulting, PerkinElmer, Inc. |
| 16:45-17:05 |
Grease oxidation analysis using Pressure Differential Scanning Calorimetry (PDSC) techniques to determine antioxidant performance |
|
Cory SCHOMBURG |
|
PerkinElmer, Inc. |
| 17:05-17:25 |
Condition monitoring of grease lubricated components based on dissolved gas analysis (DGA) |
|
Jesper SØRENSEN VINTHER, Mads HEUCKENDORFF , Hans MØLLER |
|
COWI A/S |
| 17:25-17:45 |
Ultrasound solutions for lubrication control |
|
Patrice DANNEPOND |
|
SDT Ultrasound Solutions |
| 17:45-18:05 |
Reliability Centered Maintenance -Reengineered (RCM-R®) Process and Case Studies |
|
Jesús R. SIFONTE |
|
PdMtech, Inc. |
| 18:05-18:25 |
Health monitoring for electro mechanical actuators from design to operation |
|
Iñaki BRAVO-IMAZ , Tomas EPPLE , Egoitz KONDE , Susana FERREIRO , Aitor ARNAIZ |
|
IK4-TEKNIKER, Liebherr-Aerospace Lindenberg GmbH |
|
