| Wednesday, 4 June 2008 |
|
|
|
|
|
| Room |
1 (large) |
2 |
3 |
| |
Introduction |
|
|
| 9:00 |
Ana Aranzabe |
|
|
|
Tekniker |
|
|
| |
Keynotes |
|
|
| |
Chairperson: A. Aranzabe |
|
|
| 9:10 |
Lubrication in Race Cars |
|
|
|
W. Biasatti |
|
|
|
Epsilon Euskadi |
|
|
| 9:30 |
New Challenges in Lubricants
Design |
|
|
|
L. Fernández Ruiz-Morón |
|
|
|
Repsol YPF |
|
|
| 10:00 |
Intelligent Cooling System
Project. Challenges for future Aircraft Engine Cooling |
|
|
|
N. Raimarckers, D.
Bajusz |
|
|
|
Techspace Aero - Safran
Group - R&T Manager - Lubrication System |
|
|
| 10:30 |
Coffee Break |
|
|
| |
Topic A - Applications of
fluid lubricants, greases, solid lubricants |
Topic H - Lubricant testing |
Topic D - Environmentally
friendly lubricants |
| |
Chairperson: J. Barriga |
Chairperson: J. Ameye |
Chairperson: L. Fernández |
| 11:00 |
Mixed Liquid-Solid
Lubrication of Bidimensional Contacts: Theoretical Modelling |
EDXRFS Supported Screening
Tests of Engine Oils |
The European Ecolabel Lubricants as a Driver Towards a More Environmental Friendly Lubricants Market |
|
F. Abate, V. D’ Agostino, A. Senatore |
R. Sági, N. Miskolczi, L. Bartha, P. Halmos |
C.H.J. van Oijen, F. van Broekhuizen, H. Krop |
|
University of Salerno |
University of Pannonia |
IVAM research and consultancy on sustainability |
| 11:20 |
Lubricated sliding of Titanium Nitride Coatings Deposited by Pulsed Magnetron Sputtering |
Characterization of the
Deposits of the First Ring Grooves of Diesel Engine Pistons /
Thermo-Oxidative Degradation of an Engine Oil |
Taper Roller Bearings
Lubricated with Bio-Greases |
|
D. Major, Z. Liu, P.J. Kelly, R.D. Arnell |
M. Diaby, M. Sablier, A. Le Negrate, M. El Fassi, J. Bocquet |
B.M. Graça, A.J.V. Campos, J.H.O. Seabra |
|
University of central
Lancashire |
Ecole Polytechnique, Laboratoire des Mécanismes Réactionnels, CNRS, Palaiseau |
INEGI, Instituto de Engenharia Mecânica e Gestao Industrial |
| 11:40 |
The Pressure-Viscosity
Coefficient of Ionic Liquids |
Analysis of the Parameters
with Influence on Friction in Elastohydrodynamic Lubrication |
REACh-Free Lubrication with
a Novel Polymer Thickened Lubricant |
|
A.S. Pensado, M.J.P.
Comuñas, J. Fernández |
P. Lafont, J. Echávarri, J.B. Sánchez-Peñuela, J.L. Muñoz, A. Díaz, J.M. Munoz-Guijosa, H. Lorenzo, P. Leal |
M. Fathi-Najafi, Graham Gow,
M. Kruse |
|
Laboratorio de propiedades
Termofísicas |
Universidad Politécnica
de Madrid |
AXEL Christiernsson |
| 12:00 |
Bonded solid Lubricant
Behaviour - Evolution of the Friction and Geometry in a Sliding Contact
Between a Ball and Coated Flat |
High Throughput Blending for
Automation of Lubricant Formulations |
Vegetable and Biodegradable
Lubricants: formulation development and testing |
|
D.
Burke, I. Sherrington |
W. Zinsser, W. Zinsser-Noethen |
B. Fernández-Díaz, A. Igartua, J. Barriga, F. Urkiola, R. Garces, J. Fernández, C. Díaz de Cerio, E. Llamazares, R. Arguinzoniz |
|
University of Central
Lancashire |
Zinsser Analytic GmbH |
Tekniker |
| 12:20 |
Lubricants for the Food
Industry |
Determination of adhesive
and Cohesive Properties of Greases Used in Metal-Metal and Metal-Polymer
Contacts |
An Oxidation Study of
Soybean Oil as a Potential Lubricant Basestock |
|
S. Vivanco |
S. Achanta, M. Jungk, D. Drees |
W. Castro, J.M. Perez, S.Z.
Erlan, F. Caputo |
|
Verkol, S.A |
Falex tribology N.V. |
Pennsylvania State
University |
| 12:40 |
Lunch |
|
|
| |
Topic A - Applications of
fluid lubricants, greases, solid lubricants |
Topic H - Lubricant testing |
Topic D - Environmentally
friendly lubricants |
| |
Chairperson: J.E. Fernández Rico |
Chairperson: J. Seabra |
Chairperson: P. Urkiola |
| 14:40 |
Improved Mixed and Boundary
Lubrication with Glycerol-Diamond Technology |
Models for Predicting Friction in Elastohydrodynamic Lubrication |
Biodegradability - Important
characteristic of Environmental Friendly Lubricants |
|
M.I. De Barros Bouchet, J.M.
Martin |
P. Lafont, J. Echávarri, J.B. Sánchez-Peñuela, J.L Muñoz , A. Díaz , J.M. Munoz-Guijosa, H. Lorenzo, J. Muñoz |
L. Bogatu, D. Popescu, C.
Tanasescu |
|
Ecole Centrale de Lyon |
Universidad Politécnica
de Madrid |
Icerp, S.A. |
| 15:00 |
Quantitative
Characterization of Magnetorheological Fluids for Smart Lubrication |
On the Relationship Between
Time-Dependent Rheology and Tribological Behaviour for Lubricating
Greases |
Identification and
Characterization of Biolubricants Oxidation Products to be Trapped by
Nanoporous Materials |
|
M. Zubieta, M. J.
Elejabarrieta, M. M. Bou-Ali |
M.A. Delgado J.M. Franco, C.
Valencia, C. Gallegos |
A. Marcaide, A. Aranzabe, M. Hernaiz, B. Coto, E. Aranzabe, G. Beobide |
|
Mondragon
Unibertsitatea |
University of Huelva |
Tekniker |
| 15:20 |
Improving of Tribological
Properties of Vegetable Oils by Solid Lubricant Nanoparticles |
Miniaturised Fibre Sensors
for Lube Oil Analysis |
Use of an Environmental
Friendly Lubricant in Farm Equipment - A Field Test |
|
D.P. Cursaru, C. Tanasescu, T. Juganaru, D. Ciuparu, L. Bogatu |
L. Ben Mohammadi, M. Holzki,
T. Klotzbuecher |
J.M. Perez, G.C. Caufmann, L. Holland |
|
Universitatea
Petrol-Gaze |
Institut für Mikrotechnik
Mainz |
Pennsylvania State
University |
| 15:40 |
The Value of Starting with Clean Lubricants |
Perspectives of
Nonhydrocarbon-based Engine Oils and Triboactive Materials |
Computational Approach to
Absortion of Biolubricant Oxidation Products in Nanoporous Material |
|
M. Moon, I. Bowmer |
M. Woydt, Spaltmann, A.
Igartua, X. Fernández, O. Areitioaurtena |
B. Coto, A. Marcaide, A. Aranzabe, C. Zubizarreta, M. Hernaiz |
|
Bel-Ray Company |
BAM |
Tekniker |
| 16:00 |
Coffee Break |
|
|
| |
Topic G - Lubrication
technology (bearings, transmissions, seals, etc.) |
Topic F - Condition Monitoring |
Topic D - Environmentally
friendly lubricants |
| |
Chairperson: R. Arnell |
Chairperson: J. Seabra |
Chairperson: P. Urkiola |
| 16:30 |
Study of Self-Lubricated
Coatings on Angular Bearing Used in Gear Boxes |
Ageing Behaviour of Engine
Oils in Passenger Cars |
Biodegradable Grease
Maintenance: Degradation Control |
|
N.M. Renevier, I.
Sherrington. R.D. Arnell |
A. Grafl, N. Dörr, K. Varmuza, J. Friske, G. Glanznig |
M. Hernaiz, E. Aranzabe, A.
Aranzabe, A. Marcaide, J. Terradillos |
|
Jost Institute for Tribotechnology |
AC2T Research GmbH |
Tekniker |
| 16:50 |
Stability and Flow Behavior
of a Magnetorheological Lubricant in a Magnetic Shock Absorber |
|
|
|
G.R. Iglesias, L.F. Ruiz-Morón, M.T. López-López, J. Insa, J.D.G. Durán, A.V. Delgado, F. González-Caballero |
|
|
|
University of Granada,
Faculty of Sciences |
|
|
| 17:10 |
End of sessions |
|
|
|
|
|
|
| Thursday, 5
June 2007 |
|
|
|
|
|
| Room |
1 (large) |
2 |
3 |
| |
Keynotes |
|
|
| |
Chairperson: J. Terradillos |
|
|
| 9:00 |
Varnish Problems of Modern
Gas Turbines |
|
|
|
A. Sasaki |
|
|
|
Kleententek corporation |
|
|
| 9:40 |
Root Cause Analysis Techniques as Part of Modern Proactive Maintenence Strategies |
|
|
|
J. Ameye |
|
|
|
Fluitec International |
|
|
| 10:20 |
Relavance of Cutting Fluids
in Manufacturing Processes |
|
|
|
M. Garbrecht, C. Heinzel, J. Eckebrecht, Th. Koch, E. Brinksmeier |
|
|
|
Foundation Institute for Materials Science (IWT) |
|
|
| 11:00 |
Coffee |
|
|
| |
Topic F - Condition
monitoring |
Topic E - Lubrication
management |
Topic C - Lubrication in
Manufacturing Processes |
| |
Chairperson: P. Weismann |
Chairperson: J. Vizintin |
Chairperson: M. Garbrecht |
| 11:30 |
Continuous On-line Gear Oil
Condition Monitoring |
Predictive Maintenance in
Hydro Generation: Experience and Results Obtained in the Last Four Years |
Development and Optimization of MQL Processes Applied to Deep Hole Drilling |
|
B. Krzan, J. Vizintin |
E. Segura, E. Rosico, J. Calzada |
A. Azpeitia, J.J. Gabilondo,
I. Iribarren |
|
Universiti of Ljubljana |
Endesa Generación, S.A. |
Etxe-tar |
| 11:50 |
Oil Condition Monitoring of
Gas Engine Oils by Infrared Spectrometry and Chemometrics |
How an Excellent Lubrication Management Support an Enterprise Profitability Improvement |
Influence of the Chemical Composition of EDM Fluids in Surface Quality. Homogeneous AdditivationTechnology |
|
J. Felkel, N. Dörr, K. Varmuza, T. Leimeter, F. Novotny-Farkas |
J. Collantes, Y.
Pacheco |
A. Aranzabe, X. Maidagan, E.
Aranzabe, R. Ferret |
|
AC2T Research GmbH |
C&c Ingenieros Asociados
S.R.L. |
Tekniker |
| 12:10 |
Integrated Semi Intelligent Diagnostic Tools for Condition Monitoring of Machinery Based on the State of its Lubricating or Power Transmission Oil |
How does the Lubrication
Integral Service Affect Your Business? |
Minimum Quantity Lubrication Machining Test: the Effect of Different Metalworking Fluids on Cutting Conditions |
|
T. Clayton, R. Ahmed, C.
Wragg, M. Burrows |
L. García |
M. Rostagno, S. Durante, M.
Comoglio, |
|
Monitin Ltd |
TBN, Servicios Integrales
de Lubricación |
DIAD |
| 12:30 |
Compressor Lubrication
Management Improvement by Means of On-Line Monitoring |
The Total Lubrication
Managemet Benchmarking the Plant Lubrication Program |
Waste-free Production of Crank Shafts – Saving Resources and Reducing Cost by Using Multi-purpose-oils and Compatible Metal Working Fluids |
|
A. Anitua, E. Castillo, A.
Arnaiz, E. Gorritxategi, E. Aranzabe, A. Villar |
C. Imberlin, N. Van
Leeuw |
S. Joksch |
|
Miquel Carrera y Cía |
ANtwerp Lion Oil Works
N.V. |
Oemeta Chemische Werke GmbH |
| 12:50 |
The Utility of Onsite
Chemical Analysis of Lubricant using FTIR in Remote Wind Farm Locations |
LIS Recharged - An Improved
Lubricant Identificition System |
Formulation of High
Performance Cutting Oils using Environmentally Friendly Raw Materials |
|
G. Miller, F. Higgins |
G. Trujillo |
G.M. Matei, L. Cira, M.G.
Amuza, M. Luca, E. Moraru, A. Drumeanu, R. Rapeanu, C.Popa |
|
A2 Technologies LLC |
Noria Latín América,
S.A. |
ICERP, S.A. |
| 13:10 |
Lunch |
|
|
| |
Topic F - Condition
monitoring |
Topic H - Lubricant testing |
Topic C - Lubrication in
Manufacturing Processes |
| |
Chairperson: G. Trujillo |
Chairperson: F. Velasco |
Chairperson: P. Smith |
| 15:10 |
The Results and Experiences of a Predictive Health Program for Turbomeca Helicopter Turbines by Using Different Monitoring Methods in the Oil System |
Surface Damage by Rolling
Contact Fatigue in Elastohydrodynamic Contacts Using Artificial Dents |
Tribological Assessment of
Conventional and Eco-lubricants for Deep Drawing of Stainless Steel |
|
M. Jimenez, S. Guyetand, J. Ameye |
F. Baetens, L. Magalhães, L.
Andrade Ferreira |
E. Fuentes, J.C. Rodriguez,
X. Fernández, L. Muntada, P. Navio |
|
Fluitec International |
Facultade de Engenharia da Universidad do Porto |
Tekniker |
| 15:30 |
Understanding Varnish
Build-up Mechanisms as part of Analytical Techniques for Gas Turbine Oil
Monitoring Programs |
Test Benches of Innovative
Systems and Components for Aircraft Gas Turbine Engines |
Phase Behaviour of
Metalworking Emulsions |
|
J. Ameye, G. Livingstone, J.Terradillos |
P. Hendrick, O. Berten,
F.Gruselle, N. Raimarckers, G. Saive |
L. Bastardo-Zambrano |
|
Cleanoil |
Université Libre de
Bruxelles (ULB) |
Nynas Naphthenics AB |
| 15:50 |
A Fluid Solution to
Preventing Varnish Formation in Hydraulic Systems |
Alternative Fuels from the
Engine Lu-brication Point of View |
Multifunctional Metalworking
Fluids used in Bearing Industry |
|
A. Barber, R. Profilet, B. Filippini |
R. Luther |
M.G. Amuza, G.M. Matei, E. Moraru, M. Luca, A. Drumeanu, R. Rapeanu, C. Popa |
|
Lubrizol France SAS |
Fuchs Europe
Schmierstoffe GmbH |
ICERP, S.A. |
| 16:10 |
Analysis of Used Oils out of
Diesel Engines Using Vegetable Oil as Replacement for Diesel Fuel |
Technological Advances in
the Direct Observation Of Precipitated Wear Debris Particles for Automatic
Particle Sizing and Counting |
Tribological Performance of
Water Lubricated PEEK and PEEK Composites |
|
P. Weismann, C. Heine, T.
Fischer |
V.F. Leavers |
A. Mimaroglu, H. Unal, U. Sen, S. Yilmaz |
|
Oildoc GmbH |
V4L Particles Ltd. |
Universiti of Sakarya |
| 16:30 |
Coffee |
|
|
| |
Topic F - Condition
monitoring |
Topic H - Lubricant testing |
Topic B - Use of Lubricants
Additives |
| |
Chairperson: M. Fathi |
Chairperson: T. Smith |
Chairperson: R. Luther |
| 17:00 |
The Value of on-site
Analysis for Remote Operations |
Novel Method for Lube
Quality Status Assessment Based on Visible Spectrometric Analysis |
Influence of Glycerol
Monooleate as a Friction Modifier on Tribological Behaviour of Tugsten-Doped
Diamond like Carbon |
|
M. Morrison |
E. Gorritxategi, J.
Terradillos, A. Aranzabe, A. Arnaiz, E. Aranzabe |
L. Ozbolt, M. Kalin, J.
Vizintin |
|
Oilcheck Pty Limited/Fluidcheck Pty Limited |
Tekniker |
University of Ljubljana |
| 17:20 |
Modified Air Release Test
Method for Transmission Oils |
Study of Reduction of
Frictional Power Loss for Diesel Engine |
Tribological Behaviour of
Copper Oxide Nanoparticle Suspension |
|
P. Weismann, S. Bots |
M. Soejima, T. Hamatake, T.
Kitahara |
J.E. Fernández, J.L. Viesca,
A. Hernández Battez |
|
Oildoc GmbH |
Kyushu Sangyo University, Faculty of Engineering |
University of Oviedo |
| 17:40 |
End of sessions |
|
|
|
|
|
|
| Friday, 6 June
2008 |
|
|
|
|
|
|
| Room |
1 (large) |
2 |
3 |
| |
Keynotes |
|
|
| |
Chairperson: I. Sherrington |
|
|
| 9:00 |
Rotary Air Compressor
Lubrication-Developing and Testing the New Generation of Lubricants |
|
|
|
P. Smith |
|
|
|
© Shell Global Solutions International BV, 2008 Shell Global Solutions UK |
|
|
| 9:40 |
Enhancing Gear Performance
Through Bio-Lubricants |
|
|
|
J.H.O. Seabra |
|
|
|
Universidade do Porto, Facultade de Engeaharia |
|
|
| 10:20 |
Coffee |
|
|
| |
Topic G - Lubrication
technology (bearings, transmissions, seals, etc.) |
Topic F - Condition Monitoring |
Topic B - Use of Lubricants
Additives |
| |
Chairperson: A. Arnaiz |
Chairperson: P. Aguirre |
Chairperson: A. Igartua |
| 10:50 |
Influence of Fuel Dilution on Power Loss in Low SAPS Oils for Automotive Applications |
Modern Technologies to Monitor and Maintain Critical Industrial Lubricants |
Additive Technology for EU
Ecolabel Formulations |
|
K.S. Winnard, I. Sherrington, E.H. Smith |
J. Ameye, G. Livingstone |
F. Giuntoli, E. Nehls, T.
Habereder |
|
Univ. of Central
Lancashire |
Fluitec International |
Ciba Specialty
Chemicals |
| 11:10 |
The Effect of Operating Temperature on a Laboratory Test for Open Gear Lubricant Performance |
Advanced Tools for Hydraulic
Contamination Control on Mobile Equipment |
Improvement of Lubricants Efficiency with Metal Nanoparticles Addition |
|
P.L. de Vaal, H.
Guidi-Figueroa |
D. Navarro |
A. Kotnarowski |
|
University of Pretoria |
John Deere Construction and Forestry |
Radom Technical
University |
| 11:30 |
Friction of Oil Lubricated Elastomeric Seals under Conditions of Short Stroke Reciprocating Motion |
Behavioural Study of Engine Oil Lubricants in Gas Engines Used in Urban Transport Fleets |
Lubricant Degradation Controlled by Nanoporous Materials |
|
K.J. Monaghan, J.G. McNulty, A. Straub |
V. Macián, B. Tormos, P. Redón, S. Ballester |
G. Majano, E-P. Ng, I.
Partono. H. H. Jensen, S. Mintova |
|
BHR Group Limited |
CMT-Motores Térmicos |
Université de Haute
Alsace |
| 11:50 |
Biolubricants and Triboreactive Materials for Automotive Applications |
|
Ionic Liquids as New Lubricating Base Oil |
|
A. Igartua, X. Fernández, O. Areitioaurtena, R. Luther, C.H Seyfert, O.J. Rausch, I. Illarramendi, M. Berg, H. Schultheiß, B. Duffau, S. Plouseau, M. Woydt |
|
M. Uerdingen |
|
Tekniker |
|
Merck Solvent Innovation
GmbH |
| 12:10 |
An Analytical Study on the Mixed Lubrication of a Piston Ring Pack in a Reciprocating Engine |
|
Hydroisomerization of Hungarian Crude Slack Wax On Pt/SAPO-11 Catalyst |
|
T. Hamatake, M . Soejima, T.
Kitahara |
|
Gy. Pölczmann, J. Hansók, J.
Baladinez |
|
Oita University |
|
University of Pannonia |
| 12:30 |
Efficiency Improvements through High Viscosity Index Shear Stable Hydraulic Fluids: Laboratory Results and Field Evaluation |
|
|
|
M. Alibert, F. Camera, F.
Moreno |
|
|
|
Evonik Rohmax Additives GmbH |
|
|
| 12:50 |
Clossure |
|
|
| 13:00 |
Farewell Lunch |
|
|
|
|
|
|
